Definition of Shotcrete:

The American Concrete Institute ( ACI ) definition is “concrete placed by a high-velocity pneumatic projection from a nozzle. “Shotcreting compacts concrete in-place with high-velocity impact of the material stream. Thus, shotcrete is placement method, and not a product different from concrete.

At Premier Gunite of Wisconsin, we exclusively employ ACI Certified Nozzlemen and ACI Certified    Shotcrete Inspectors on our sites.

 

TWO PROCESSES: Wet and Dry Mix Shotcrete.

Features & Benefits

Shotcrete has often been described not as a material but as a process. Both wet and dry Shotcrete processes produce a material that exhibits superior hardened properties to high quality conventional concrete, such as high strength, low permeability and high durability.

Although the hardened properties of shotcrete are similar to conventional cast-in-place concrete, the nature of the shotcrete placement process provides additional benefits, such as excellent bond with most substrates and instant or rapid capabilities, particularly on complex forms or shapes.

The properties of both wet- and dry-process shotcrete can be further enhanced through the addition of many different additives or admixtures such as:

• Silica Fume — Provides reduced permeability, increased compressive and flexural strength, increased resistance to alkali and chemical attack, improved resistance to water washout, reduced rebound levels, and allows for thicker single pass applications;
• Air-Entraining Admixtures — Improve pumpability and adhesion in wet-process shotcrete and freeze-thaw durability in both wet and dry processes;
• Fibers — Control cracking, increase toughness values, improve impact resistance and energy absorption; and
• Accelerators — Improve placement characteristics in adverse conditions, allow for thicker single pass applications, increase production capabilities, and reduce the occurrence of fallouts on structures subjected to vibration.

Sustainability

The numerous advantages of the shotcrete process are especially evident when viewed from a sustainability point of view. Unlike many sustainability claims that are based on political or social ideals that are often difficult to quantify and substantiate, the sustainability advantages of the shotcrete process directly and positively impact the economic side of a project, falling in-line with traditional business decisions such as material, labor, and time savings as well as improved quality.

In addition to the following “top ten” sustainability advantages of shotcrete, ASA’s Sustainability page offers a wealth of information on the topic.

• Formwork savings of 50 to 100% over conventional cast-in-place construction;
• Formwork does not have to be designed for internal pressures;
• Complex shapes require very little, if any, formwork;
• Crane and other equipment savings or elimination;
• Labor savings of at least 50% in repair applications;
• New construction speed savings of 33 to 50%;
• Speed of repair reduces or eliminates downtime;
• Better bonding to the substrate, which enhances durability;
• Adaptability to repair surfaces that are not cost-effective with other processes; and
• Ability to access restricted space and difficult-to-reach areas, including overhead and underground.

Methods of Application – Dry Mix or Wet Mix Processes

Dry Mix (sometimes referred to as Gunite)
Wet Mix

Wet or Dry?

Although both wet and dry shotcrete have specific benefits, advancements in both material and equipment technology make both processes almost interchangeable. In most applications, the preferred method is determined by:

• Economics;
• Availability of material and equipment;
• Site access; and
• The expertise and preference of the contractor.

Today, rebound levels, dust levels, and properties such as bond strength, compressive strength, and durability can be similar whether the wet or dry method is used.

Repair & Restoration

Shotcrete is often the best alternative when repair and restoration of foundations are being contemplated and can be the ideal application method for both reinforced and nonreinforced foundation restorations. From Stone-Rrock Foundations, Dams, Spillways, Bridges, Parking Ramps to chemical and automotive to retaining walls and highway structures, the opportunities are endless.

The shotcrete professional must be able to integrate new materials with in-place construction to form a composite that will stand up to exposure and use. As important as the materials is the coordination of effort from a properly qualified shotcrete contractor, materials supplier, engineer, and architect. When all of these pieces are in place, the exceptional benefits of the shotcrete process are realized.

• Bridges
• Parking Garages
• Dams & Reservoirs
• Seismic Retrofit
• Marine
• Sewers
• Stone foundations
• Retaining walls
• Support walls

 

Contact us at: 715-382-4296 or email: [email protected]

Servicing the Wisconsin Tri-State area including Eau Claire, Wausau, Green bay, Oshkosh, Fond du lac, Beaver Dam, Watertown, La Crosse, Tomah, Rice lake.